Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Beverly?
Garage door work in Beverly typically costs $150 – $600 for repairs, and most jobs land somewhere in that range. A simple roller or cable fix sits near the low end, while a full new door installation runs $700 – $2200 depending on the door and how much of the framing and hardware has to change. The written estimate you get after we look at the actual door sets the final price.
That range covers the work we do every day: torsion and extension spring repair, broken cables, misaligned tracks, worn rollers, opener problems, damaged panels, and complete door swaps. We specialize in garage doors only, which means we aren’t a general handyman adding a side service. When we quote a job in Beverly, it’s from someone who spends the whole week inside garage door mechanisms, not someone squeezing it between drywall patches.
For a broader look at our repair work, see garage door repair chicago lawn. And when you’re ready for a number on your own door, call (855) 658-4150 – estimates are free.
Key Takeaways
- Most Beverly garage door repairs fall between $150 and $600.
- One spring replacement runs $180 – $340; a matched pair usually costs about twice that.
- New door installation ranges from $700 to $2200, with door style and size driving most of the difference.
- Opener repair is $120 – $320; a fresh opener installation is $250 – $550.
- We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment.
Garage Door Cost Breakdown (2026)
Here’s how the line items stack up for Beverly in 2026. Treat every figure as a typical estimated range, not a promise – the door in front of us decides the real price.
| Service | Typical Estimated Range |
|---|---|
| Garage Door Repair (general) | $150 – $600 |
| Spring Repair (one spring) | $180 – $340 |
| Cable Repair | $130 – $250 |
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Panel Replacement | $250 – $500 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
| New Door Installation | $700 – $2200 |
A word on springs, because this trips people up. The $180 – $340 range is for one spring. Doors almost always carry a matched pair, and replacing both at once is the standard recommendation since a second spring that’s the same age isn’t far behind the first. So a matched pair usually comes out to roughly twice that range. We’ll tell you straight which springs your door has and what replacing the full set involves before anyone touches a winding bar.
What pushes a repair toward the top of its range? Rusted or snapped cables that need both sides replaced, a bent track that has to be straightened and re-anchored, or a door where the panel damage is bad enough that the section has to come out and a replacement go in. What keeps it low? Single-part swaps – a worn roller set, one bad hinge, a sensor that needs realigning. Installation is its own world: a single-car door in a basic raised-panel steel style trends toward $700 – $1100, while a double-car door with windows, insulation, or a carriage-house look climbs toward the $1500 – $2200 end.
What Affects Garage Door Pricing in Beverly
Beverly is a neighborhood of detached single-family homes, and the housing stock swings from older brick bungalows and Tudors to newer construction. That mix changes what we find when we open up a door, and it changes the price. Here are the factors that move a number the most.
- Door age and spring type. Older Beverly homes often run extension springs on the sides of the door, while newer construction tends to use torsion springs on a center shaft. Torsion work requires different tools and more careful setup, and conversions between the two systems cost more than servicing the system you already have. Either way, this is the highest-risk job on any garage door – the springs and cables are under serious tension – and it’s not something to attempt without training. The coil of a wound torsion spring can cause serious injury in a fraction of a second, so we recommend leaving it to a trained technician.
- Brand and parts availability. We work with LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment, and knowing how each brand is built saves time. A Clopay panel isn’t interchangeable with an Amarr panel; a Genie opener’s logic board doesn’t behave like a LiftMaster’s. Factory-familiar work means fewer surprises and fewer “we’ll have to order it” delays.
- Door size. A standard single-car door (roughly 8 to 9 feet wide) uses less material than a double-car door (16 feet). Bigger doors mean bigger springs, heavier panels, and more expensive torsion hardware.
- Material and insulation. A basic steel door is the budget option. Wood, composite, and insulated steel doors cost more, and an insulated door on an attached garage can make the room above it more comfortable through Chicago-area summers and winters.
- Panel vs. full door. If one section is dented or cracked, a panel replacement at $250 – $500 usually saves the door. But if the damage is spread across several panels, or the door is old enough that a matching panel is discontinued, a full swap is the smarter money.
- Opener condition. A door that’s fine but a chain drive that’s grinding might just need opener repair at $120 – $320. If the opener is the original builder unit from decades ago, a new installation at $250 – $550 is often the better call. We handle the LiftMaster and Chamberlain/myQ smart-home ecosystem as well as older Craftsman units, so modern and legacy systems both get real attention.
One local note worth mentioning: Chicago’s freeze-thaw cycle is hard on the moving parts of a garage door. Winter salt and grit work their way into the rollers and hinges, and the spring tension that felt right in October can feel off by February. Doors that get regular roller and hinge attention tend to avoid the bigger repair bills.
How to Save on Garage Door
You don’t have to chase the lowest bid to keep costs down. A few practical habits do more good than shopping around for a bargain that ends up costing more in the long run.
- Fix the panel, not the door, when you can. If the damage is isolated, a $250 – $500 panel replacement is a fraction of a $700 – $2200 full installation. We’ll tell you honestly when a panel swap makes sense and when it doesn’t.
- Replace both springs at once. It feels like spending more up front, but a second trip and a second service call a few months later usually costs more overall. A matched pair done together is the better value.
- Stay on top of lubrication. A few minutes with a proper garage door lubricant on the rollers, hinges, and track, done periodically, slows wear and keeps small problems small. Avoid greasing the tracks themselves – that attracts grit.
- Get an opener repair first. Before you assume the opener is dead, let a technician look. Opener repair at $120 – $320 is far cheaper than a full $250 – $550 replacement, and a lot of “dead” openers are just a bad sensor, a stripped gear, or a logic board that needs attention.
- Ask about parts availability. We carry garage door parts as a service line, which means many repairs happen on the same visit rather than waiting on an order. Fewer return trips, less downtime.
A free estimate is the simplest saving of all. Call (855) 658-4150 and we’ll come out, look at the door, and give you a written number before any work starts. No guesswork on the phone, no surprise on the invoice.
FAQs – Garage Door Cost
How much does garage door repair cost in Beverly?
General garage door repair in Beverly runs $150 – $600, and most single-issue repairs land near the middle of that range. Simple part swaps like rollers ($110 – $220) or track realignment ($120 – $240) sit at the low end, while spring or cable work with both sides replaced moves up. Call (855) 658-4150 for an exact quote – estimates are free.
Is it cheaper to repair or replace a garage door?
Repair is almost always cheaper, and a repair in the $150 – $600 range beats a $700 – $2200 installation in nearly every case where the door structure is sound. Replace the whole door when the damage spans several panels, the door is badly off-track and bent, or the panel style is discontinued and no longer matches. A technician can tell the difference in one visit.
How much does spring repair cost in Beverly?
One spring runs $180 – $340, and because most doors use a matched pair, replacing both at once costs about twice that. Springs are under extreme tension and can seriously injure someone without the right tools and training – this is a job for a professional. Call (855) 658-4150 to get a written estimate for your door.
Can you come today?
Same-day service is often available, and our dispatch runs from 7am to 7pm. A snapped spring or a door stuck open can’t wait, so call (855) 658-4150 early and we’ll work out the fastest window we can. Estimates are free either way.
How much does a new garage door cost in Beverly?
New door installation runs $700 – $2200. A basic single-car steel door sits near the low end; a double-car door with insulation, windows, or a carriage-house style pushes toward the top. Opener installation, if you need it too, is a separate $250 – $550. The written estimate after we measure sets the final price – call (855) 658-4150 to set one up.
Every quote we give is based on what your door actually needs, from a roller set at $110 – $220 to a full installation at $700 – $2200. We’re specialists in garage doors and nothing else, with technicians who’ve spent up to 12 years working on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment. If you’re weighing repair against replacement, or you just want a straight number on a spring that let go, call (855) 658-4150 – same-day service is often available, dispatch runs from 7am to 7pm, and your free estimate comes with upfront pricing and a satisfaction guarantee.
Pricing reflects the Beverly market as of 2026. Garage Door Repair Chicago Lawn offers free estimates – call (855) 658-4150.
What Our Customers Say
"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Brooke Barrett"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Matt Schaefer"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Adam Sutton